ZBoost Cellular REACH Specifications download pdf (Page 16)

zBoost

Cellular REACH ZB560Y Manual

Improving Your Coverage Area

Should you desire to improve coverage, you may:

• Relocate the External Antenna in order to capture a better signal –higher is usually better

and outside is better than inside.

• Increase the distance between the Base Unit and the External Antenna.

• Purchase an upgrade antenna available at www.zBoost.com

Note: Using a signal meter or an antenna application on a smartphone is a more accurate way to

measure a stronger signal than the bars on a phone.

Upon initial power up, the LED will cycle RED, GREEN and ORANGE for 30 seconds. After 30

seconds, a series of GREEN ashes will indicate the quality of your setup. Following this, a solid

GREEN light indicates normal conditions. If it is not solid GREEN, follow the instructions in the

Base Unit LED Indicators section. Adjustments may be needed to optimize performance. If you nd

the increased signal coverage is acceptable, however, no additional adjustments are needed. See

“zBoost Base Unit Light Indicators” on page 10 for more information.

zBoost Base Unit

Power Supply

Indoor Antenna

Coax Cable

External Antenna

15 ft. of

Vertical

Separation

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

ZBoost Cellular REACH Specifications Page 16